Product Categories
(Total 12 Products for Pc Strand 1x7 15 24mm 1860 Mpa)
1x7 15.24mm 1860 Mpa PC Strand
High tensile PC (prestressed concrete) steel strand is a type of steel wire used in the construction of prestressed concrete structures. It is specifically designed to handle high-stress loads and provide the necessary tension to improve the strength and durability of concrete.
Key Specifications: Structure: 7 wires,...
7 wires 1860MPa PC Strand 9.3mm
Low relaxation Prestressed Concrete Strand is twisted by 7 wires, which is applied to high efficiency and energy saving materials of concrete structures after stabilizing treatment.
Product characterizes high intensity, high breakage force, high extension, product has a good effect on improving safety coefficient and...
PC Strand is mainly for the use of pre-stressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi-story industrial buildings, stadiums, coal mines and etc.
1x7 12.7mm 1860 Mpa PC Strand is seven-wire, uncoated steel strand for use...
1x7 15.24mm 2230 Mpa PC Strand
Structure: 7 wires, typically made of high-strength steel, twisted together in a helical arrangement. Diameter of Strand, mm[in.]
17.8 mm 1860 MPa PC Strand is a high-strength, low-relaxation prestressing steel cable composed of seven wires (1×7 structure) twisted into a single strand. It is widely used in prestressed concrete structures, where superior tensile strength, durability, and dimensional precision are required.
Manufactured...
1x19 21.8mm 2230 Mpa PC Strand
The 1x19 21.8mm 2230 MPa PC strand is an ultra-high-strength steel strand designed for demanding structural applications. Compared to standard 1860 MPa strands, it offers superior performance, reduced material use, and enhanced durability.
The 1x19 21.8mm 2230 MPa PC strand has versatile, perfect for cable-stayed...
Introduction and application scope of 15.20mm 2230MPa low relaxation prestressed steel strand
I. Core parameters and characteristics of the product
Basic specifications: nominal diameter 15.20mm, twisted by 7 high-strength steel wires (1 center wire + 6 peripheral wires), cross-sectional area of about 140mm²,...
Introduction to low-relaxation prestressed steel strand with a diameter of 17.80mm and a strength of 2230MPa
I. Product definition and structure
Prestressed steel strand is a spiral steel bar made of multiple high-strength steel wires. It improves the crack resistance and bearing capacity of concrete structures by...
21.80mm 2230MPa low relaxation prestressed steel strand full analysis and application scenarios
I. Product core parameters and structural characteristics
Specification definition: Nominal diameter 21.80mm, made of 19 high-strength steel wires (usually 1+9+9 three-layer structure), cross-sectional area of about...
9.3mm Prestressed Concrete Strand 1860 Mpa
9.3 Low-relaxation prestressed steel strands are important materials for the construction of prestressed concrete structures. They are made from high-carbon steel wire rods through cold drawing, twisting and stress relaxation stabilization treatment. Commonly, they are composed of 7 steel wires twisted together, with...
The 1x7 17.8mm 1860 MPa PC strand is a high-strength, seven-wire prestressed concrete steel strand used primarily in prestressed concrete structures.
Standard: GB/T5224-2014 Standard: ASTM A416/A416M:2012
Standard: ASTM A416/A416M:2012
The key features of the 1x7 17.8mm 1860 Mpa PC Strand include its low...
1x19 21.8mm 1860 Mpa PC Strand
The 1x19 21.8mm 1860 MPa PC strand is made up of 19 individual high-strength steel wires twisted into a single, compact strand. It’s designed for prestressed and post-tensioned applications where extra load-bearing capacity and structural stability are required. It has higher load capacity than 1x7 strands, better...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.